Good x264 settings (May 2020 update 2)

These settings are written in cli format that is commonly used, e.g. --chroma-qp-offset 3; voukoder (and obs) uses api format which gives the same formatting with multiple encoders, e.g. chroma_qp_offset=3

x264 Common (generally all video applies)

[

Note: all unlisted settings are default

Motion search: --me umh --subme 10 (7mod x264 has max of 11) --merange 32

Rate Control: --keyint <FRAME RATE × 8> --min-keyint <1~5, 1 gives the best quality, faster as it increases> --bframes 11 --b-adapt 2 --ref 3 --no-fast-pskip --direct auto

Quantization: --crf 17 --qpmax 22 --rc-lookahead <FRAME RATE × 3>

Adaptive Quantization: --aq-mode 2 --aq-strength 0.7 --trellis 2

Loop Filter: --deblock 0:0 --psr-rd 0.7:0.2

GPU Acceleration (don't expect it works helps a lot): --opencl

Very very light Denoise: --nr 10

Resize/Crop(more info can be found on internet): --vf crop:left:up:right:down/resize:width,height,sar(rectangular pixel compression),box(not sure what's this),chromaSubsampling,resizeAlgorithm

Resize up quality boost: --partitions all

Windows export log: 2>D:\folder\log.txt

Linux export log: 2>&1 | tee D:\folder\log.txt]

x264 fast (don't use original presets, they're not well aged!)

[

Motion search: --me hex --subme 8 --merange 16 --no-chroma-me

Rate Control: --keyint <FRAME RATE × 5> --min-keyint <KEYINT ÷ 2> --bframes 6 --ref 3 --scenecut 33

Quantization: --crf 17 --qpmax 22 --rc-lookahead <FRAME RATE × 2>

Adaptive Quantization: --aq-mode 3 --aq-strength 0.8

Loop Filter: --deblock 1:0 --psr-rd 0.7:0.3

GPU Acc: --opencl]

x264 lossless, special use only

[

Motion search: not working

Rate Control: --keyint <FRAME RATE × 3~4> --min-keyint <=KEYINT> --bframes 6 --ref 3

Quantization: --qp 0 --chroma-qp-offest -3

Adaptive Quantization: as default

Loop Filter: not working

GPU Acc: --opencl]

x264 Very slow, Good quality high compression

[

Motion search: --me esa --subme 10 --merange 52

Rate Control: --keyint <FRAME RATE × 10> --min-keyint 1 --bframes 13 --b-adapt 2 --ref 3 --no-fast-pskip --direct auto --scenecut 35 --ipratio 1.5

Quantization: --qpmin 13 --crf 19.5 --rc-lookahead <FRAME RATE × 3>

Adaptive Quantization: --aq-mode 3 --aq-strength 0.8 --trellis 2

Loop Filter: <default>

GPU Acc: --opencl

Very light Denoise: --nr 20

hqdn3d denoise (x264 7mod exclusive, or filter setting in vouk): --vf hqdn3d:1.2,1.2,1.2,1.2

Quality drop at credits roll: --zones <creditsBeginFrame>,<creditsEndFrame>,crf=28

]

x264 Very slow, High quality high compression (great for ~5min clips)

[

Motion search: --me esa --subme 10 --merange 52

Rate Control: --keyint <FRAME RATE × 6> --min-keyint 1 --bframes 14 --b-adapt 2 --ref 3 --no-fast-pskip --direct auto

Quantization: --qpmax 24 --crf 17 --rc-lookahead <FRAME RATE × 3>

Adaptive Quantization: --aq-mode 2 --aq-strength 0.7 --trellis 2

Loop Filter: --deblock 0:0 --no-psy

GPU Acc: --opencl

Very very light Denoise: --nr 10

]

x264 Maximum Useful Cost Possible, good quality

[Motion Search: --me esa --merange 56 --subme 10

Rate Control: --keyint <fps × 5> --min-keyint 1 --bframes 16 --b-adapt 2 --ref 3 --no-fast-pskip --direct auto --pbratio 1.5

Quant: --qpmax 24 --crf 18 --rc-lookahead <fps × 4> --chroma-qp-offset -2 --vbv-maxrate 8000

Adaptive Quant: --aq-mode 2 --aq-strength 0.7 --trellis 2

Loop Filter: --deblock 0:0 --no-psy

GPU Acc: --opencl

Very light Denoise: --nr 20]

x264 Manual Quality, unknown compression, very fast

[Motion Search: as default

Rate Control: --keyint <FRAME RATE × 2~3> --min-keyint <=KEYINT> --bframes 6 --ref 3 --scenecut 33

Quantization: --qp <18 or other qualities you wish>

Adaptive Quantization: not working

Loop Filter: --deblock 0:-1 --psr-rd 0.7:0.53

GPU Acc: --opencl]

Zitat von CptDayDreamer

Sorry, that might be an idiotic question, but how can I configure the preset you give us in Voukoder (for me Premiere Pro)? I can just select the 3 given presets for x264.

Thats fine for me, its in the options page menu above the presets. The downside is you have to input every setting manually in every video project for current version (mouse select), I think the later updates than this comment would just add more presets, but you probably still have to do the calculation, and especially HDR info related parameters manually

Zitat von CptDayDreamer

iAvoe okay thank you! I wasn't able to set denoise and GPU acc. Is that also in Voukoder on the settings page? And with --no-psy for example you mean no-psy=yes or no-psy=1 in boolean, right?

When I start to render a 30 min 1080p/60fps video with the given settings the rest time just increases and increases to more than 10 hrs but there is no progress. I think something is wrong or does it really need so much time?

Yeah I didn't see that setting either, but it's a x264 built-in function, it could be added in later version? I guess

Yes, it is no-psy here

I'm not sure why you are going this slow, x264 is a pretty fast encoder unless you maxed out motion search, I think it's due to some effect, you can try pre-render the sequence

Zitat von Vouk

Really great! I will add them to the x264 preset lists in voukoder!

Hey I've just checked, the v5 actually didn't add those settings, is there anything wrong?

Zitat von Vouk

Damn, I forgot to push my latest changes to GIT so the build server did not include this changes.

But it will look like this:

Hahaha ok I see, but just saying the lossless mode actually won't be fast or slower though

Zitat von CptDayDreamer

iAvoe I've also downloaded 5RC2 now to test your presets. High Quality, High Compression would run like 24 hrs for a 30min video? Is that normal? I'm on Ryzen 3700X and GTX 1070.

And the more interesting thing is that the high quality preset always fails. The lossless (fast) preset as well. Adobe Media Encoder logs this:

Adobe Premiere

Es war nicht möglich den Encoder zu initialisieren.

Dieser Fehler tritt meinstens bei einer ungültigen Parameterkonfiguration auf.

Which means that this parameterconfig isn't valid.

Did you tried this one Vouk ?

Alles anzeigen

Yep, it is, this setting has maxed high cost parameters. However there are even slower modes that are less effective. I uses this only for ~5min videos though

I'm not sure why it's not working though