2 or 3 or 4 I have an incompartible ERROR
Hi, I've had this problem for a long time too, but in the last update this problem was fixed a bit, you have to put it in 2reframe from the settings to get 4reframe, right, this is very funny, right showing it incorrectly to get the setting, I wrote about it in detail if you read my posts.
Just be a little more patient and read my reponses carefully. The bug should have been fixed in this version.
Sorry, I translated your words using Google translator, maybe your translation seems to have been translated by Google translator a little differently or ERROR, True, I wrote a few questions, almost no answer, I waited 23 hours for the answer to the last LOG files, if you took your time I'm sorry!
By the way! I tried the new version of Voukoder, no errors yet, but to get 4reframe you need to select 2reframe from the settings! so it turns out to be 4reframe, + the colors are selected from the settings to be BT.709, but the voucode does not apply, to eliminate this, select BT.709 by adding an additional filter from the voucoder filters and 1080video is in 4level we have to select 4.2 from the settings so that it does not remain.
Another suggestion, if possible, would be to add an additional menu that shows how much the video size will be from the settings, just like the older generations of the previous voukoder showed!
Thank you for your attention!
1 weitere Frage, wenn möglich!
Warum ist der aktualisierte Voucode NVENC SDK 9.1 installiert? Ist das NVENC SDK auf 11.0.10 aktualisiert?
Oder ist es wichtig, dass der Gutschein funktioniert oder dass er besser funktioniert?
Unfortunately I am currently extremly busy with my day job and can't provide a fix instantly. Sorry.
If I haven’t upset you with my questions or made you angry by writing down voukoder errors, I can show you a few more voukoder mistakes!
I hope that you will definitely correct these small but very important mistakes!
I wish you a good and fun New Year!
May the New Year bring you and your programs good luck!
Sincerely, Sukhrob from Uzbekistan!
Does anyone understand the posts I write?
What about LOG files?
I downloaded all versions of Voukoder and adjusted the settings the same way.
(You can see in the pictures)
I used Voukoder 7 at first and saw that the video files it exported had completely different features than in Adobe H.264, I did the settings just like in Adobe H.264 and gave an error while exporting! (Please read my LOG files, I have tried almost all versions of voukoder, no error has been detected so far in versions up to voukoder 6.1rc3, but who can explain this as long as there are errors in higher versions?
(I would be stunned if I saw my wedding videos on TV now, which was not the case a year ago)
Voukoder LOG File is here:
Voukoder 6 export LOG_no error.zip
Voukoder 6.1 export LOG_no error.zip
Voukoder 6.1rc3 export LOG_no error.zip
Voukoder 6.2 export LOG_error detected.zip
Voukoder 6.2rc3 export LOG_error detected.zip
Voukoder 6.2rc5 export LOG_error detected.zip
Since I have NVIDIA VIDEO CODEC SDK 11.0, do I need to download and install it on my computer?
The video exported in adobe h.264 is divided into 4 re-frames. (you can see in the picture) If it is exported in Voukoder, this indicator is 3, if I turn it on in the settings and change it to 4, the error shown in the picture is displayed. if I export on voucoder x264 such an error will not occur! and most importantly it turns out to be Lvl 4.0
(I wrote it through google translator, if you don't understand me at least a little, please tell me, I will translate by correcting mistakes) Thank you for understanding me!
GPU:Asus RTX 2060 Super (Latest Studi Driver
CPU:i9 9900K
Soft:Adobe CC2017
Seems I really have to go with the latest SDK at some point (and drop support for old GPUs).
What help or advice can you give me?
What can I do to avoid this error?
Please provide a low level voukoder log file.
How?
I exported an 1-hour video on Voukoder, some TVs don't get it, it freezes, it doesn't even read.
Exporting in Adobe H.264 is not such a problem, but it takes a long time to export in H.264.
Please look at the picture how can i adjust the voucode as in H.264?
If I do the Voukoder settings just like in H.264 is it alerting me as an error during export? What is this? Or is one setting wrong?
Can anyone explain this? Please hurry up!
Can I also install Voukoder in Photodex ProShow Producer 9.0.3797 ?
Can I do this on my own?
P.S Sometimes it takes too long to export slides, although the i9 is 9900K ...
I have 1 more question!
5e + 04Hz What is this?
Usually when I say I export from Voukoder 7, the word is written, but my other computers do not have such a record, can you explain that? Isn't that a mistake?
I've only seen this on 1 computer, I've tried all versions of the voice coder, (I don't have this on other computers)
My computer settings:
OC:Win10 PRO 20H2
CPU: i9 9900K
GPU: MSI RTX 2060 Super (Latest Studio Driver installed)
Asus TUF Z-390 Plus Gaming (Bios latest updated)
Adobe Premiere Pro CC2017
First of all, hello Vokoder team!
I apologize in advance for grammatical errors, I am writing to you via google translator, I hope you understand me correctly and help me!
I am using Adobe Premiere Pro CC2017 and Voukoder version 7, please show me how to export voukoder properly.
I mainly shoot on a Canon EOS 6D camera and the 1 hour video installed should be 4Gb.
Camera: Canon EOS 6D
Video size: 1920x1080
29.97FPS_NTSC
THANK YOU in advance, thank you for a lifetime!
Hi there! I will try to help you as much as I can and I would be happy if my help touched! (Translated by Google Translate!)
1: Select H.264 to export the video!
2: Set the bitrate to the size you want and remember !, if you set the bitrate to 5Mb, you will write it as 5000 in Voukoder, (1.5Mb> 1500!)
3: The size of the video can be easily determined via H.264!
and the size of the video will come out (+ 50Mb-200Mb for audio can be added depending on your choice of audio codec! That is up to 192kbps-320kbps)
4: Once you have set the video bitrate, select Voukoder.
5: You select H.264 NVENC for the fastest encoding.
6: Set the settings to VBR and enter the bitrate entered in H.264 into the voucode. (You can also adjust it using the settings shown in the pictures.)
I'm glad I got help!
I apologize for grammatical errors!
Please also answer my first question, I have a question above the photos.
I've only seen this on 1 computer, I've tried all versions of the voice coder, (I don't have this on other computers)
My computer settings:
OC:Win10 PRO 20H2
CPU: i9 9900K
GPU: MSI RTX 2060 Super (Latest Studio Driver installed)
Asus TUF Z-390 Plus Gaming (Bios latest updated)
Adobe Premiere Pro CC2017
